Pittsburgh, United States → Columbus, United States
141 nautical miles · Direction: west
The straight-line distance from Pittsburgh to Columbus is 261 km (162 miles). Columbus lies roughly west of Pittsburgh; the initial great-circle bearing is 259° (W). It is a domestic route within United States.
Pittsburgh (Northeast, United States) sits at 40.4406°N, 79.9959°W; Columbus (Midwest, United States) is at 39.9612°N, 82.9988°W. The initial great-circle bearing is 259° (W); on a great circle the heading changes along the way.
| Mode | Figure | Basis |
|---|---|---|
| ✈️ Flight | ~50 min | Estimate: 800 km/h + 30 min taxi. Not a schedule; total trip time is longer. |
| 🚗 Road | ~339 km · ~4h 14min | Rough estimate: straight line × 1.3 at 80 km/h. Not live routing. |
| 🚆 Rail | No timetable data | Same landmass, so rail may exist — check an operator. |
Rough road-length estimate for Pittsburgh to Columbus: about 339 km. This is an estimate, not a routed drive — the actual road distance depends on the road network, crossings and the route chosen.
The geographic halfway point of the great-circle path between Pittsburgh and Columbus lies at approximately 40.2106°N, 81.5027°W — the position that is an equal 131 km from each city along that path. It is a geometric midpoint, not a halfway point by road.
Pittsburgh and Columbus both use the America/New_York time zone, so there is no normal clock difference between them.
The straight-line distance from Pittsburgh to Columbus is approximately 261 km (162 miles, 141 nautical miles).
Columbus lies roughly west of Pittsburgh; the initial great-circle bearing is 259° (W).
Estimated flight time is about 50 min (great-circle distance at 800 km/h plus 30 min for taxi, take-off and landing). It is not an airline schedule, and over such a short distance airport time dominates; total airport-to-airport trip time is longer.
Rough road-length estimate for Pittsburgh to Columbus: about 339 km. This is an estimate, not a routed drive — the actual road distance depends on the road network, crossings and the route chosen.
Pittsburgh and Columbus both use the America/New_York time zone, so there is no normal clock difference between them.
Straight-line distance uses the great-circle (Haversine) method. Flight and road figures, where shown, are estimates rather than schedules or live routing. How SnapDistance calculates distances