Milan, Italy → Florence, Italy
135 nautical miles · Direction: east
The straight-line distance from Milan to Florence is 249 km (155 miles). Florence lies roughly southeast of Milan; the initial great-circle bearing is 138° (SE). It is a domestic route within Italy.
Milan (Lombardy, Italy) sits at 45.4642°N, 9.1900°E; Florence (Tuscany, Italy) is at 43.7696°N, 11.2558°E. The initial great-circle bearing is 138° (SE); on a great circle the heading changes along the way.
| Mode | Figure | Basis |
|---|---|---|
| ✈️ Flight | ~49 min | Estimate: 800 km/h + 30 min taxi. Not a schedule; total trip time is longer. |
| 🚗 Road | ~324 km · ~4h 3min | Rough estimate: straight line × 1.3 at 80 km/h. Not live routing. |
| 🚆 Rail | No timetable data | Same landmass, so rail may exist — check an operator. |
Rough road-length estimate for Milan to Florence: about 324 km. This is an estimate, not a routed drive — the actual road distance depends on the road network, crossings and the route chosen.
The geographic halfway point of the great-circle path between Milan and Florence lies at approximately 44.6216°N, 10.2380°E — the position that is an equal 125 km from each city along that path. It is a geometric midpoint, not a halfway point by road.
Milan and Florence both use the Europe/Rome time zone, so there is no normal clock difference between them.
All distances from Milan · All distances from Florence
The straight-line distance from Milan to Florence is approximately 249 km (155 miles, 135 nautical miles).
Florence lies roughly southeast of Milan; the initial great-circle bearing is 138° (SE).
Estimated flight time is about 49 min (great-circle distance at 800 km/h plus 30 min for taxi, take-off and landing). It is not an airline schedule, and over such a short distance airport time dominates; total airport-to-airport trip time is longer.
Rough road-length estimate for Milan to Florence: about 324 km. This is an estimate, not a routed drive — the actual road distance depends on the road network, crossings and the route chosen.
Milan and Florence both use the Europe/Rome time zone, so there is no normal clock difference between them.
Straight-line distance uses the great-circle (Haversine) method. Flight and road figures, where shown, are estimates rather than schedules or live routing. How SnapDistance calculates distances